Using Connect web apps

(Camera)

Shows the currently selected camera. Select this option to change the camera to use.

When the selected camera is working properly, your self view (what you will be sending to other participants) is shown in the preview window.

(Microphone)

Shows the currently selected microphone. Select this option to change the microphone to use.

When the selected microphone is working properly, a green bar appears below the video preview which indicates the level of audio volume being picked up by the microphone.

(Speakers)

Shows the currently selected speakers or headset. Select this option to change the speakers to use.

To check that the selected speakers are working properly, select Test your sound. A tone will be played from that speaker.

Controls the amount of bandwidth you'll use for the meeting.

If you are on a cellular connection or slow Wi-Fi connection, or if you experience slow, frozen or low-quality video, you may want to change this to a lower setting.

Use Auto if you do not want to apply any bandwidth limitations to your call.

Enables Pexip's noise suppression feature, which reduces the volume of non-speech background noise in the audio you are sending to the meeting.

If this feature is disabled, your device may instead use its own noise suppression functionality, if available and compatible with your browser.

This option is disabled by default.

Enable this option to prioritize motion over sharpness when sharing content with other participants. This is the best option when sharing video; the image will be less sharp, but the motion will be smoother.

Leave disabled to prioritize sharpness. This is the best option when sharing static presentations and images.

This option is disabled by default.

This setting controls whether the currently selected camera can be controlled (if it supports pan/tilt/zoom, or zoom-only) by another participant — either another Connect app user, or a SIP/H.323 endpoint user (supported in gateway calls only) — see Control another participant's camera for more information.

The Connect web app requires Chrome version 87 or later. You can go to chrome://media-internals/ to check if your device's camera supports pan/tilt/zoom. Your browser will also ask for permission to allow your camera to be controlled:

This option is disabled by default.

Enable this option to view shared presentation as part of the video mix whenever an Adaptive composition layout is being used.

When disabled, any presentation being shared by another participant will appear in a thumbnail at the top of the screen, and you can toggle between the presentation and the main video.

This option is disabled by default.

Select whether you want to Blur your background, or Replace it. When replacing your background, you can choose from the default image(s) (if provided by your administrator), or you can upload your own image.

You can also select None to remove the currently selected effect.

To upload your own image:

1. Select the + button:

   

2. In File Explorer, select the image to use and select Open.

   • images must be at least 432 pixels high, and 768 pixels wide
   • images must be 16/9 ratio or narrower
   • supported formats are .JPG, .JPEG, .PNG and .WEBP
   • maximum file size is 3 MB
   • we recommend you use high-definition images

3. The image appears as a Replace option; click on the image to use it as your background:

   

Note that background blur and background replacement are available in Connect Webapp3 via Chrome, Edge or Firefox browsers on desktop devices with hardware acceleration enabled. Both features incur a significant local processing overhead which could affect the performance of your device.

Background effects are off by default.

From the top right, select Settings and then select Meeting layout.

This opens an overlay dialog from where you can dynamically change the layout of the meeting — just select the layout you want to use.

This prevents guest participant from joining the meeting. When a meeting has been locked, you can still admit them manually.

The impact of locking depends on whether or not the meeting has a Host PIN. For full details, see Locking a conference and allowing participants to join a locked conference.

When enabled, all participants in the meeting will see the names of all other participants as an overlay at the bottom of each participant's video image.

This option ends the meeting by disconnecting all participants, including yourself.

You are asked to confirm that you want to disconnect everyone.

Enter the Host PIN

Stop/start sending your audio to other participants

From the toolbar at the bottom of the screen, select Mute microphone or Unmute microphone. Alternatively, press m on your keyboard to toggle between these options.

When you're muted, other participants will no longer be able to hear you, but you will be able to hear them.

While your microphone is muted, you can press and hold down the keyboard spacebar to temporarily unmute yourself while you speak.

If your microphone detects sound while muted, you will see a message saying "Trying to speak? Your microphone is muted".

Stop/start sending your video to other participants

From the toolbar at the bottom of the screen, select Turn camera off or Turn camera on. Alternatively, press c on your keyboard to toggle between these options.

When your camera is off, other participants will no longer be able to see you, but you will be able to see them.

Share your screen with all other participants

(Available on desktop browsers only; not available on mobile browsers.)

1. From the toolbar at the bottom of the screen, select Share screen.
2. Select the window, screen or tab you want to share.

3. Optionally, select whether you want to Share system audio, or Share tab audio if you are sharing a browser tab.

   Sharing audio when sharing your screen is supported on Chrome and Edge browsers only. On Windows you can share either system audio or browser tab audio. On Mac and Linux, you can only share audio from a browser tab.

   You must have joined the conference with audio to be able to share audio. Muting your microphone does not also mute shared audio.

4. To stop sharing, select the Stop sharing button.

The best way to share a PowerPoint presentation is to start the Slide Show from within PowerPoint first, and then tab to Connect Webapp3, share your screen, and select the Slide Show window.

Note that the ability to present into a meeting may have been restricted to Hosts only.

Change your background

From the toolbar at the bottom of the screen, select Change background effect. From the Effects tab, select whether you want to Blur or Replace your background — or select None to remove the currently selected effect.

For more information on these options, see Effects.

Indicate that you wish to speak

From the toolbar at the bottom of the screen, select Raise hand. The meeting Host is alerted that your hand is raised. If you no longer wish to speak, you can select the button again to Lower hand.

Host participants can also lower your hand.

View a live transcription of the meeting

(Available when live captions have been enabled by the administrator)

Select Show live captions or Hide live captions to start or stop a live transcription of the meeting audio. The transcription will be shown to you alone, but all the other meeting participants will be informed that transcriptions have been started (or stopped).

This is a tech preview feature and requires Pexip Infinity v30 or later.

When a participant starts a presentation, you automatically see the content they are sharing as your main image, and the image of the participants reduces to a small thumbnail at the top of your screen.

You can toggle between viewing the presentation and viewing the participants by clicking on the thumbnail.

You can expand the size of the main window so that the thumbnail is overlaid on the main image, rather than sitting separately at the top of the screen, using the Expand and Collapse buttons which appear in the toolbar.

If Prefer presentation in mixhas been enabled, whenever an Adaptive composition layout is being used you will instead view the shared presentation as part of the video mix.

View a presentation in a separate window

Whether you are the presenter or a participant, you can view the current presentation in a separate browser window.

To do this, from the top right of the screen select Dual-screen mode.

To return to viewing the presentation in the same window, either close the separate window or select Dual-screen mode again.

Stop/start viewing the video of yourself

(Available when chat has been enabled by the administrator)

When a new chat message is received, you'll see a notification at the bottom left of your screen:

To view the messages, select the Chat button. A side panel opens which shows all chat messages, along with events such as participants joining or leaving the meeting.

Chat messages are visible to everyone else in the conference with a chat-capable client (such as Skype for Business or Connect app). Participants will only see messages sent after they joined the meeting.

To send your own message, type it in the text box at the bottom of the panel and select Send:

You can also share videos and images by pasting their URL into the text box.

The number of other conference participants is shown on the Participants button at the bottom left of the screen. This button will also show a notification if there are any participants with raised hands or who are waiting to join the meeting.

To open a panel showing the full list of participants, select the button.

Participants are sorted into groups, including:

• Raised hand: the participant has indicated that they'd like to speak.
• Waiting in lobby: the participant has not yet joined the meeting, for example because the meeting has been locked and they are waiting for a Host to admit them.
• In this meeting: the participant is connected to the meeting.
• External: the participant is connected to an externally-hosted conference, such as a Microsoft Teams or Skype for Business meeting, or Google Meet.

To hide the Participants panel, select the Participants button again.

Participants may have one of the following icons next to their name:

indicates that the participant has been muted by a Host

indicates that the participant is sharing their screen

indicates that the participant is currently speaking (or sending audio).

(Requires Host privileges)

Open the Participants panel. At the top is a list of participants who have Raised a hand.

Participants are listed in the order that they raised their hand.

(Requires Host privileges)

From the Participants panel, hover over the participant's name; additional icons appear. Select Lower hand.

A participant can also lower their own hand.

Mute/unmute another participant

(Requires Host privileges)

From the Participants panel, hover over the participant's name; additional icons appear.

Select Mute or Unmute.

When muted, a icon is shown next to the participant's name.

Change a participant's role

(Requires Host privileges; you cannot change your own role to Guest.)

From the Participants panel, hover over the participant's name; additional icons appear. Select and then select Make Host or Make Guest.

You cannot change the role of External Guest participants (those who are connected directly to an externally-hosted conference, such as a Microsoft Teams or Skype for Business meeting, or Google Meet).

(Requires Host privileges)

From the Participants panel, hover over the participant's name; additional icons appear. Select and then select Spotlight.

For more information, see Spotlighting a participant (classic layouts only).

Control another participant's camera

(Requires Host privileges. This feature must be enabled by an Administrator; not all endpoints can be controlled remotely.)

You can enable your own camera to be controlled by another participant — see Enable far-end camera control for more information.

Calls in a Virtual Meeting Room or Virtual Auditorium

From the Participants panel, hover over the participant's name; additional icons appear. Select and then select Camera control.

The Remote camera control overlay appears. Use the buttons on the overlay, or your keyboard arrow and + or — keys, to pan, tilt and zoom the selected participant's camera. You can also select Spotlight participant to bring the participant into the main video window for as long as the Remote camera control overlay is open.

Direct person-to-person calls

From the toolbar at the bottom of the screen, select Camera control. The Remote camera control overlay appears. Use the buttons on the overlay, or your keyboard arrow and + or — keys, to pan, tilt and zoom the selected participant's camera.

(Requires Host privileges)

From the Participants tab, hover over the participant's name; additional icons appear. Select  and then select Transfer.

Enter the alias of the conference you wish to transfer the participant to, its PIN (if applicable) and whether the participant should join as a Host, and then select Transfer.

You can transfer any participant, except yourself.

(Requires Host privileges; applies to Virtual Meeting Rooms and Virtual Auditoriums only)

From the Participants tab, hover over the participant's name; additional icons appear. Select  and then select Enter DTMF. A DTMF keypad appears:

Send DTMF tones to an external conference or device

(Applies to gateway calls only)

If you're in a gateway call to another device or to an externally-hosted conference such as Microsoft Teams or Google Meet, you can send DTMF tones to the device or meeting.

From the toolbar at the bottom of the screen, select Enter DTMF. A DTMF keypad appears:

(Requires Host privileges)

You'll receive a notification on the Participants button whenever any participants are waiting in the meeting lobby because they are:

• waiting to join a locked conference, or
• waiting to join a meeting that requires authentication, but they are using an endpoint that does not support authentication.

Select the button to open the Participants panel, and locate the participant in the Waiting in lobby section. You then have two options:

• To allow a participant to join the conference, select Admit.
• If you do not want them to join, select Deny. The participant will be disconnected from the meeting.

(Requires Host privileges)

From the bottom of the Participants panel, select Mute all Guests.

For Connect Webapp3 clients, local muting is sychronized with server-side muting. For more information, see Administrative vs local muting.

(Requires Host privileges)

From the Participants tab, hover over the participant's name; additional icons appear. Select Remove. You are asked to confirm that you want to disconnect the participant.

The participant who is removed sees a message saying that another participant disconnected them.

Add a participant to the meeting

(Requires Host privileges)

1. From the top right of the screen, select the User menu button and select Add participant.
2. Enter the address of the participant. This must be in the format name@domain
3. Select whether you want the participant to have Host privileges.
4. Select Add participant.

The call is placed from the meeting to the participant and they appear in the participant list. If and when the participant answers the call they will join the meeting; if they do not answer, or do not accept the call, they will disappear from the participant list.

Share a link to the meeting

To send a link to the meeting to someone so that they can join you:

1. From the top right of the screen, select the User menu button and select Add participant.
2. Next to the meeting link, select Copy.

You can then send this link to other participants who can paste it into their browser to join the meeting.

Disconnect yourself from the conference

From the User menu at the top right of the screen select Settings. From the Meeting settings tab select Disconnect all.

This option ends the meeting by disconnecting all participants, including yourself.

You are asked to confirm that you want to disconnect everyone.

(Available when connected with audio or video)

From within your self-view window, select Connection quality.

A dialog appears that displays statistics such as the codec being used, incoming and outgoing audio and video bitrates, and how many data packets have been lost and received.

If breakout rooms are enabled, a Breakout rooms side panel lets Hosts set up and manage the breakout rooms.

See Breakout rooms for more information.

The name that appears to other conference participants.

You're asked to enter your name the first time you use the Connect app, but you can change your name from the home page by clicking on it.

(Camera)

Shows the currently selected camera. Select this option to change the camera to use.

When the selected camera is working properly, your self view is shown in the main video window.

If you select None you will join the meeting without a camera, but you can still see everyone else's video.

(Microphone)

Shows the currently selected microphone. Select this option to change the microphone to use.

When the selected microphone is working properly, a green bar appears under the main video window when audio is detected. The length of the bar represents the level of audio volume being picked up by the microphone.

If you select None you will join the meeting without a microphone, but you can still hear everyone else's audio.

(Speakers)

Shows the currently selected speakers or headset. Select this option to change the speakers to use.

To check that the selected speakers are working properly, select the speaker icon from the bottom left of the main video window and then select the speaker to use. A tone will be played from that speaker.

Bandwidth * The administrator can provide a first-time default for this option.

The maximum bandwidth for the call, and the bandwidth at which the initial call attempt is made. Note that calls may be temporarily downspeeded due to network conditions.

The default is Medium (up to 1264kbps), but if you are on a cellular connection or slow Wi-Fi connection you may want to reduce this to Very Low (up to 256kbps).

You should also reconnect using a lower bandwidth if you experience slow or low-quality video.

Languages * The administrator can provide a first-time default for this option.

(Only applies if additional languages have been enabled by your administrator.)

Allows you to select from a drop-down menu the language to use in the Connect app.

If your browser or device's default language is supported by the Connect app, that language is used automatically. Alternatively, your administrator may have specified a default language to use.

This setting determines how presentations from other participants are initially received.

Presentations can be received in two formats:

• A higher-bandwidth full motion HD stream (suitable for presentations with a lot of movement). With this option, Pexip Infinity sends the presentation to the Connect app as a video stream at up to 30 fps, so movement will appear smooth.

  The actual frame rate used depends on the capabilities of the endpoint that is sending the presentation. The Connect app can send presentations at up to 30 fps; other clients may send at a higher or lower frame rate.

• A lower-bandwidth series of still images (suitable when very sharp images are required). With this option, Pexip Infinity periodically takes a snapshot of the presentation and converts it to JPG format, and sends that to the Connect app at between 0.5 to 1 fps. For this reason, presentations that contain a lot of movement may appear jerky to clients using this option.

This setting is on by default: presentations are initially received as full motion video, and you can subsequently elect to view them as still images by selecting the button on the toolbar at any time during the call. However, when View incoming presentation in full motion is not selected, presentations received by you are always shown as still images by default, and you can then elect to view them as full motion video by selecting the button.

This setting toggles the availability of the option to pair with an alternative device when placing a call.

This is on by default.

This setting controls whether the currently selected camera can be controlled (if it supports pan/tilt/zoom, or zoom-only) by another participant — either another Connect app user, or a SIP/H.323 endpoint user (supported in gateway calls only) — see Control another participant's camera for more information.

The Connect web app requires Chrome version 87 or later. You can go to chrome://media-internals/ to check if your device's camera supports pan/tilt/zoom. Your browser will also ask for permission to allow your camera to be controlled:

Far-end camera control (FECC) is off by default.

This setting controls whether, when you have muted your microphone, you can unmute it temporarily by holding down the spacebar on your keyboard.

Push to talk is on by default.

This setting enables and disables the selected background effect (i.e. background blur).

You can also toggle the selected effect on and off from a button in your self-view window at any time before or during a meeting.

This setting controls whether your local background blur is enabled or not. This lets you obfuscate a distracting or sensitive background.

Note that background blur is only available when using Webapp2 via Chrome or Edge browsers on desktop devices with hardware acceleration enabled. It incurs a significant local processing overhead which could affect the performance of your device.

Background blur is off by default.

This setting determines the maximum frame rate used when you share your screen with other participants. A lower frame rate results in images with more Sharpness and is best for static presentations; a higher frame rate is less sharp and is best for content where there is more Motion. The default is 2 frames per second; the maximum is 30fps.

Note that the actual frame rate at which a presentation is sent depends on the browser, computer, network quality, and nature of the presentation.

1. Ensure that you have selected the camera and microphone you wish to use, and they are working correctly:

   • You should see your own image in the video window.
   • If required, and if you are using a Chrome or Edge browser on a desktop device with hardware acceleration enabled, you can select in the self-view window to blur your background.
   • The microphone icon should be green and you should see a green bar under the video image indicating the volume of audio being detected.

2. Select .

3. In the box at the top right of the window, enter the address of the person or meeting you wish to join:

   

4. Either click on the icon to the right of the box, or press enter.

1. Ensure that your microphone icon is green and you see a green bar under the video image indicating the volume of audio being detected.
2. Select .

3. In the box at the top right of the window, enter the address of the person or meeting you wish to join:

   

4. Either click on the icon to the right of the box, or press enter.

When you join the call, you'll be able to hear other participants and they'll be able to hear you, and you can send and receive content, but you can't send or receive any video. Instead, in the main video window there is an infographic of the participants in the call:

1. Select .

2. In the box at the top right of the window, enter the address of the meeting you wish to join:

   

3. Either click on the icon to the right of the box, or press enter.

You'll join the meeting as a presentation and control-only participant - you won't send any audio or video, and you won't receive any audio or video from other participants. However, you'll be able to view content that others are sharing, and share content with others. You'll also have access to the participant list and events, and be able to control the conference (if you are a Host).

For some meetings, you are offered the ability to enter a PIN. If this is your VMR, enter your Host PIN. If not, the meeting organizer should have told you the PIN to use. If you haven't been given a PIN, select Join to join as a Guest:

The PIN determines whether you join the meeting as a Host or Guest. Hosts can control the meeting and the other participants; Guests can't control the meeting but can still see and hear the other participants, and share content.

Some meetings will require that you identify yourself by signing in using your organizational credentials:

This will automatically open a new browser window which can be closed when you have signed in successfully.

You can add the addresses of people or meetings you call frequently to your Favorites list.

To do this:

1. Select the add icon to the right of the Favorites section.

2. Enter the address of the person or meeting room, and the name you want to remember it by:

   

3. Select the icon or press enter.

You can also add a favorite from the Recents list (see below).

The addresses of any people or meetings you have previously called are shown in the Recents list.

• To call anyone in this list again, simply click on the address.

• To use an address in the list as a basis for a new address to call (for example if you have mis-typed an address), select the edit icon to the right of the address. The existing address appears in the box at the top of the list; from here you can edit it before placing the call.
• To add an address in the list to your Favorites (see above), select the star icon to the right of the address.

You can use your Connect app to pair with another video (or audio) device. When paired, your Connect app will join the meeting as a presentation and control-only participant, and the paired device will join with video (or audio). Paired devices are added automatically to any Virtual Meeting Room or Virtual Auditorium you join as a Host from your Connect app. The paired device is disconnected automatically from the meeting when you disconnect your Connect app.

Pairing is useful if, for example, you often make calls from a dedicated meeting room with a videoconferencing endpoint that you use for the main video, but you also want to use your Connect app to control the meeting and view content.

To pair with an alternative device:

1. From the bottom of the call panel, select Pair with a device.
2. From the Device Pairing panel, select the + icon in the top right corner.

3. Enter the address of the device, and the name that you want to remember it by.

   By default, the paired device is set to Showing presentation on this device, meaning that any content being shared, as well as the main video, is shown. If you don't want content to be sent to the device (for example, if you intend to view content on your Connect app), click on the option; it changes to Presentation hidden on this device, meaning that the device will only show the main video stream. Click the option again to toggle back to showing content.

   

4. Select the icon or press Enter.

5. The new device appears in the list. To use it for your next call, click on it - the selected device appears in blue:

   

6. To return to the main call page, select the icon at the bottom left of the panel.

Now, at the bottom left of the home screen you'll see Calling using followed by the name of the selected paired device:

When a paired device is selected, whenever you place a video (or audio-only) call to a VMR, the selected device is added to that VMR as a video (or audio-only) participant, and your connect client joins the VMR as a presentation and control-only participant.

To stop using the additional device:

1. Click on the Calling using ... link at the bottom left of the home screen.
2. From the list of devices, select Default.

The button at the bottom of the call panel changes to Pair with a device — this means that only your connect client will be used the next time you place a call.

Enter Host PIN (if joined as Guest)

Change your camera, microphone or speakers during a call

1. From the top of the side panel, select Control .
2. Select Select media devices.
3. Select the camera, microphone or speakers/headset, and then choose a new one from the list of available options.

Enable background effects

You can select in the self-view window to blur your local background, or to remove the blur.

Note that background blur is available when using Connect Webapp2 via Chrome or Edge browsers on desktop devices with hardware acceleration enabled. It incurs a significant local processing overhead which could affect the performance of your device.

Pin a minimized version of the video window to your screen

From the toolbar at the bottom of the screen, select Float video window.

The main video window (including thumbnails) shrinks and is pinned on top of all your other application windows. You can drag it to a suitable location.

To return to the Chrome tab with the video window resized within it, from the pinned window select Back to tab.

To close the pinned video window, from the toolbar select Reset video window.

Share your screen with all other participants

(Available on desktop browsers only; not available on mobile browsers)

1. From the toolbar at the bottom of the window, select Share my screen.
2. Select the window, screen or tab you want to share.

3. Optionally, select whether you want to Share system audio, or Share tab audio if you are sharing a browser tab.

   Sharing audio when sharing your screen is supported on Chrome and Edge browsers only. On Windows you can share either system audio or browser tab audio. On Mac and Linux, you can only share audio from a browser tab.

   You must have joined the conference with audio to be able to share audio. Muting your microphone does not also mute shared audio.

When you are sharing, the icon changes to blue. To stop sharing, select the Stop presenting button.

The best way to share a PowerPoint presentation is to start the Slide Show from within PowerPoint first, and then tab to the Connect app, share your screen, and select the Slide Show window.

Note that the ability to present into a meeting may have been restricted to Hosts only.

Share images or PDFs with all other participants

1. From the toolbar at the bottom of the screen, select Present files.

   The Presentation screen appears:

   

2. Select +, or drag and drop the file(s) you want to share into the Presentation window. You can add multiple files, and they can be a combination of images (JPEG, BMP, PNG or GIF) and PDFs (if supported by your device). Each image and PDF page is converted into an individual slide.

3. By default, every slide is selected for presenting, but you can click on individual slides to select and deselect them:

   

4. When you have selected all the slides you want to share, select Present. Use the left < and right > on-screen controls, or the arrow keys on your keyboard, to scroll through the slides. You also have the option to View presentation in separate window.

5. To stop sharing the slides, from the toolbar select Stop presenting.

Note that the ability to present into a meeting may have been restricted to Hosts only.

When a participant starts a presentation, you automatically see the content they are sharing as your main image, and the image of the participants reduces to a small thumbnail at the top left corner.

You can toggle between viewing the presentation and viewing the participants by clicking on the thumbnail.

You can also click and drag the thumbnail to move it.

View a presentation in a separate window

Whether you are the presenter or a participant, you can view the current presentation in a separate pop-out window.

To do this, from the bottom right of the screen select View presentation in separate window. To close the window, you can select Close separate presentation window.

Expand the presentation window when it is displayed in the layout mix

When receiving presentation content in an Adaptive Composition layout, the presentation stream is shown as part of the layout mix (replacing some of the other video participants), providing the client is receiving video at a medium or higher bandwidth setting (otherwise it is displayed as one large separate stream).

You can toggle the presentation content between the "in mix" and "separate" streams via the maximize and reset buttons in the bottom-right corner of the presentation.

View a presentation at a lower (or higher) refresh rate

When a participant is showing a presentation, by default you receive it in full motion as HD video. However you may choose to receive it as a series of still images instead which may be more suitable if a very sharp image is required.

To do this, from the bottom right of the screen select View normal presentation. To return to the default view, select View full motion presentation.

(Requires Host privileges)

When a participant is sharing a presentation, other participants receive both the presentation and the main video. However, you may want to receive just the main video on a particular endpoint (for example, if you are using a meeting room system for audio and video, but you are already viewing the presentation on your Connect app, you could stop sending presentation to the meeting room system). To do this, from the Participant list, select the participant and then select Hide presentation here.

Start sending and receiving video

(For users who have initially joined without audio and video)

From the toolbar at the bottom of the window, select Start Video.

Start sending and receiving audio

(For users who have initially joined without audio and video)

From the toolbar at the bottom of the window, select Start audio.

Stop/start sending your video to other participants

From the toolbar at the bottom of the window, select Turn my camera off or Turn my camera on.

Other participants will no longer be able to see you, but you will be able to see them.

Stop/start sending your audio to other participants

From the toolbar at the bottom of the window, select Turn my microphone off or Turn my microphone on.

Other participants will no longer be able to hear you, but you will be able to hear them.

While your microphone is disabled, you can press and hold down the keyboard spacebar to talk.

Stop/start viewing the video of yourself

Show or hide the side panel

To hide or show the side panel (containing the Participant list tab and the Events tab, and the Control menu), select the Hide side panel < and Show side panel > icons. These are at the middle left or bottom of the screen, depending on your device and screen width.

When using the Connect app, a list of all other conference participants is shown in the Participant list tab of the control panel (which is to the left of or at the bottom of the screen, depending on the screen width). You can scroll through this list to view the names of other participants. You can also search for a particular participant using the Filter by name box at the bottom of the list.

The /filter command lets you filter the participant list based on certain criteria such as the participants' role.

You can show and hide the side panel by clicking on the Hide side panel < and Show side panel > icons.

Each person in the Participant list has an icon next to their name, representing their role:

Hosts, who can control the meeting and other participants

Guests

External Guests, who connected directly to an externally-hosted conference, such as a Microsoft Teams or Skype for Business meeting, or Google Meet.

Each participant also has an additional icon displayed if that participant is a streaming/recording participant, is connected as audio-only, is a video-muted Connect app participant, or is inactive, for example, if they are away from the computer (and thus their face cannot be detected in their video stream):

where the indicators represent:

Muted video or inactive (away)

Connected via audio only

Streaming/recording participant

Change a participant's role

(Requires Host privileges; you cannot change your own role to Guest.)

From the Participant list, select the participant and then select Make Host or Make Guest.

You cannot change the role of External Guest participants (those who are connected directly to an externally-hosted conference, such as a Microsoft Teams or Skype for Business meeting, or Google Meet).

From the Participant list, select the participant and then select Show Info. This brings up an overlay dialog containing details of the participant, including their avatar or image if available (otherwise a placeholder image is shown). See Applying user records for more information.

Control another participant's camera

(Requires Host privileges. This feature must be enabled by an Administrator; not all endpoints can be controlled remotely.)

From the participant list, select the participant whose camera you want to control, and then select Camera control (for person-to-person calls, this option is also available via the Camera control button on the toolbar).

The Camera Control overlay appears. Use the buttons on the overlay, or your keyboard arrow and + or - keys, to pan, tilt and zoom the camera at the far end. For calls in a Virtual Meeting Room or Virtual Auditorium you can also select Spotlight to bring the participant into the main video window for as long as the Camera Control overlay is open.

(You can also enable your own camera to be controlled by another participant — see Enable far-end camera control for more information.)

To see a list of conference events that have occurred during the course of the call (participants joining, leaving, presenting etc.), from the top of the side panel select the Events tab:

(Available when chat has been enabled by the administrator)

All events, including chat messages, are shown in the Events tab of the side panel (which is to the left of or at the bottom of the screen, depending on the screen width).

To send a message, type it in the text box at the bottom of the panel:

Messages are visible to everyone else in the conference with a chat-capable client (such as Skype for Business or Connect app).

You can also share videos and images by pasting their URL into the text box.

A visual indicator is displayed when a new chat message is received. It is displayed against the Events tab If the side panel is open and showing the participant list, or above the button used to show the side panel if the side panel is closed.

  or 

(Requires Host privileges)

From the top of the side panel, select Control and then select Lock meeting or Unlock meeting:

The impact of locking depends on whether or not the meeting has a Host PIN. For more information, see Locking a conference and allowing participants to join a locked conference.

(Requires Host privileges)

Participants who are waiting to join a locked conference are shown in the Participant list with a tick and cross next to their names. To allow these participants to join the conference, select the green tick. If you do not want them to join, select the red cross.

(Requires Host privileges)

If a Guest joins a meeting without a Host, they are kept waiting to join until the first Host joins, at which point all waiting Guests are automatically allowed in to the meeting. However, this only applies if the Host has joined with audio or video; presentation and control-only Hosts do not automatically trigger Guests to join.

If you have joined a meeting as a presentation and control-only Host and want Guests to join, from the top of the side panel, select Control and then select Start the meeting.

Add a participant to the conference

(Requires Host privileges)

1. From the toolbar at the bottom of the screen, select Add participant.

2. At the prompt, enter the address of the person you want to dial.

3. Select whether you want the participant to have Host or Guest privileges.
4. Select Call in.

The call is placed from the conference to the participant and they appear in the participant list with a green line under their name while their endpoint is ringing. If and when the participant answers the call they will join the conference; if they do not answer, or do not accept the call, they will disappear from the participant list.

Automatic routing is used when a Connect app user adds a new participant to a conference. This means that the dialed alias must match an appropriate Call Routing Rule that applies to Outgoing calls from a conference for the call to be placed (using the protocols and call control systems etc. as configured for that rule).

(Requires Host privileges)

Outbound calls are placed from a Virtual Meeting Room to a participant when a Host uses the Add participant option, or if the Virtual Meeting Room has an automatically dialed participant configured.

To cancel an outbound call, from the Participant list, select the participant and then select Cancel Dialout.

(Requires Host privileges)

From the top of the side panel, select Control and then select Change layout.

This opens an overlay dialog from where you can dynamically change the layout being used — just select the layout you want to use. You can also use the buttons at the bottom of the overlay to toggle the display of participant names on and off.

View a live transcription of the meeting

(Available when live captions have been enabled by the administrator)

Select Show live captions or Hide live captions to start or stop a live transcription of the meeting audio. The transcription will be shown to you alone, but all the other meeting participants will be informed that transcriptions have been started (or stopped).

This is a tech preview feature and requires Pexip Infinity v30 or later.

If you want to send a link to the meeting to someone so that they can join you, select the Share icon at the top left of the screen and then select Copy meeting link.

You can then send this link to other participants who can paste it into their browser to join the meeting.

Mute/unmute another participant

(Requires Host privileges)

From the Participant list, select the participant and then select Mute or Unmute.

When muted, a icon is shown next to the participant's name.

(Requires Host privileges)

From the top of the side panel, select Control and then select Mute all Guests.

(Requires Host privileges)

From the Participant list, select the participant and then select Spotlight.

For more information, see Spotlighting a participant (classic layouts only).

Indicate that you wish to speak

(Virtual Auditoriums only by default)

From the toolbar at the bottom of the screen, select Raise my hand. The meeting Host is alerted that your hand is raised. If you no longer wish to speak, you can select the button again to Lower my hand.

The meeting Host can also lower your hand.

(Virtual Auditoriums only by default; requires Host privileges)

From the top of the side panel, select Control and then select Show hands raised.

Participants are listed in the order that they raised their hand.

(Virtual Auditoriums only by default; requires Host privileges)

From the Participant list, select the participant and then select Hand down.

A participant can also lower their own hand.

(Requires Host privileges; you must be joined over audio, or video and audio)

From the Participant list, select the participant and then select Open dialpad. This opens a keypad:

This feature is generally used to communicate with external systems (such as audio bridges, automated switchboards, and recording devices) after they have been added to the conference.

Send DTMF tones to the other participant (when in a person-to-person call)

From the toolbar at the bottom of the window, select Open dialpad. This opens a keypad.

(Requires Host privileges)

From the Participant list, select the participant and then select Transfer Participant.

Enter the alias of the conference you wish to transfer the participant to, the PIN (if applicable) and whether they should join as a Guest or Host, and then select Transfer.

You can transfer any participant, including yourself.

(Requires Host privileges)

From the participant list, select the participant's name and then select Disconnect.

(Requires Host privileges)

From the top of the side panel, select Control and then select Disconnect all.

Disconnect yourself from the conference

Mute/unmute the audio coming from the conference

From the toolbar at the bottom of the screen, use the slider to adjust the volume level (which is indicated by the green bar under the toolbar).

(Available when connected with audio or video)

From the top of the side panel, select Control and then select Get media stats.

This brings up an overlay dialog that displays statistics such as the codec being used, incoming and outgoing audio and video bitrates, and how many data packets have been lost and received.

It also shows the software version of the client and the Pexip Infinity deployment it is connected to.

Some tasks can be performed using a command-line-style text input from within the Filter by name box at the bottom of the Participant list.

Hosts and Guests can filter the list of participants based on criteria such as their role or who is currently speaking. Hosts can also perform other conference control functions such as muting and unmuting participants, spotlighting a participant, and turning the text overlay on and off.

To view a full list of available commands, type / into the Filter by name box.

A description of each of the available commands is given in Text-based controls.

/lock

/unlock

Lock and unlock the meeting.

/mute [participant]† When you start entering a participant's name, the participant list is filtered to show only those participants with those characters in their name.

/unmute [participant]† When you start entering a participant's name, the participant list is filtered to show only those participants with those characters in their name.

Mute and unmute another participant.

/muteall

/unmuteall

Mute and unmute all Guest participants.

/handsdown [participant]* Available in Virtual Auditoriums only. † When you start entering a participant's name, the participant list is filtered to show only those participants with those characters in their name.

Lower a participant's raised hand.

Lower all participants' raised hands.

/disconnect [participant]† When you start entering a participant's name, the participant list is filtered to show only those participants with those characters in their name.

/disconnectall

/spotlight on [participant]† When you start entering a participant's name, the participant list is filtered to show only those participants with those characters in their name.

/spotlight off [participant]† When you start entering a participant's name, the participant list is filtered to show only those participants with those characters in their name.

Put a participant into the main video window. For more information, see Spotlighting a participant (classic layouts only).

/overlay on

/overlay off

/layout 1:0

/layout 1:7

/layout 1:21

/layout 2:21

/layout 1:33

/layout 2x2

/layout 3x3

/layout 4x4

/layout 5x5

/layout AdaptiveComposition

Change the layout of the main video window and thumbnails.

In a Virtual Meeting Room, this affects the view seen by all participants. In a Virtual Auditorium, this affects the view seen by Host participants.

/shortcuts

View a list of keyboard shortcuts.

/hand up* Available in Virtual Auditoriums only.

/hand down* Available in Virtual Auditoriums only.

Raise or lower your hand.

/filter host

/filter guest

/filter handraised* Available in Virtual Auditoriums only.

/filter spotlight

/filter speaking

/filter streaming

/filter external

/filter waiting

/filter audio-only

/filter control-only