You are here: Administration > Customizing with themes > Base Pexip theme

Base theme

Pexip Infinity ships with its own Base theme. Files from the Base theme are used when no other theme has been selected, or the selected theme does not contain the required file.

You cannot change the contents of the Base theme, but you can create your own themes by uploading customized versions of one or more of the Base files.

When a user accesses a service that has a customized theme applied, Pexip Infinity presents them with the sounds and images from the files included in that theme. If the customized theme does not include a specific file, or the service does not have a theme applied, then Pexip Infinity uses the relevant file from the default theme. If the default theme does not include the specific file either, then the file from the Base theme is used.

The same rules apply when deciding which Colors, background and text file will be used. However, if any values within this file are not specified, Pexip Infinity will use the values from the Base theme's themeconfig.json file.

The following three sections list the complete set of audio, image and configuration files that make up the Base theme.

Audio files

File name Content in Base theme
2sd-invalid-number-three-times-disconnect_48kHz_mono.wav "You have entered an invalid number three times. I will now disconnect the call."
2sd-not-entered-valid-number-disconnect-call_48kHz_mono.wav "You have not entered a valid number. I will now disconnect the call."
2sd-number-not-valid-try-again_48kHz_mono.wav "That number is not valid. Please try again."
2sd-number-pound-key_48kHz_mono.wav "Please enter the number you wish to connect to, followed by the pound key." †
2sd-please-hold-connect-you_48kHz_mono.wav "Please hold while I try to connect you."
conf-call-will-be-disconnected_48kHz_mono.wav "Your call will be disconnected."
conf-capacity_exceeded_48kHz_mono.wav "The conferencing system capacity has been exceeded."
conf-getpin_48kHz_mono.wav "Please enter the conference PIN number."
conf-getpin_pound-key_48kHz_mono.wav "Please enter the conference PIN number, followed by the pound key." †
conf-insufficient_licenses_48kHz_mono.wav "There are insufficient conferencing system licenses available."
conf-invalid_license_48kHz_mono.wav "The conferencing system license is invalid."
conf-invalidpin_48kHz_mono.wav "The PIN is invalid for this conference."
conf-leaderhasleft_48kHz_mono.wav "The Host has left the conference. The conference is about to end."
conf-participant_entry_tone_48kHz_mono.wav <empty file> (For more information, see Playing notification tones when participants join or leave a conference.)
conf-participant_exit_tone_48kHz_mono.wav <empty file> (For more information, see Playing notification tones when participants join or leave a conference.)
conf-participant_locked_out_48Khz_mono.wav Three knocks. (For more information, see Locking a conference and allowing participants to join a locked conference.)
conf-placeintoconf_48kHz_mono.wav "Welcome to the conference."
conf-waitforleader_48kHz_mono.wav "Waiting for the conference Host to join."
conf-waithostpin_48kHz_mono.wav "Waiting for the conference Host to join. If you are the conference Host, please enter the conference PIN number now."
conf-waithostpin_pound-key_48kHz_mono.wav "Waiting for the conference Host to join. If you are the conference Host, please enter the conference PIN number followed by the pound key." †
conf-you_are_the_only_participant_48kHz_mono.wav "You are the only participant in the conference."

† Alternative recordings using the term "hash key" are also available - see Preconfigured themes.

Image files

File name Image size (width, height) File format Content in Base theme Notes
audio_indicator.png 100 x 100 pixels .PNG Used to represent an audio-only participant.
capacity_exceeded_image.jpg 1920 x 1080 pixels .JPG (RGB mode only) Shown to participants (other than those using Infinity Connect) when they attempt to join a conference that has reached its maximum number of participants. For more information, see Limiting the number of participants.
insufficient_license_image.jpg 1920 x 1080 pixels .JPG (RGB mode only) Shown to participants (other than those using Infinity Connect) when they are unable to join a conference because all call licenses are currently in use. For more information, see Insufficient licenses.
invalid_license_image.jpg 1920 x 1080 pixels .JPG (RGB mode only) Shown to participants (other than those using Infinity Connect) when they are unable to join a conference because the Pexip Infinity license is not valid. For more information, see Invalid license.
no_incoming_video_icon.png 400 x 400 pixels .PNG Shown when a participant's video stream is not available.
no_main_video_icon.png 400 x 400 pixels .PNG Used when streaming a conference to indicate that there is currently no main video.
no_other_participants.jpg 1920 x 1080 pixels .JPG (RGB mode only) Shown when there are no other participants in the conference.
no_other_video_participants.jpg 1920 x 1080 pixels .JPG (RGB mode only) Shown when all other participants are audio-only or control-only.
no_presentation_video_icon.png 400 x 400 pixels .PNG Used when dual streaming a conference to indicate that there is currently no presentation.
no_video_license.jpg * 1920 x 1080 pixels .JPG (RGB mode only) Shown to participants when they are unable to join a conference because all port (video) licenses are currently in use, but there was an audio license available. For more information, see Insufficient licenses.
pin_entry_0_digits_image.jpg ‡ 1920 x 1080 pixels .JPG (RGB mode only) Shown to participants (other than those using Infinity Connect) when entering PINs.
pin_entry_1_digits_image.jpg ‡ 1920 x 1080 pixels .JPG (RGB mode only)
pin_entry_2_digits_image.jpg ‡ 1920 x 1080 pixels .JPG (RGB mode only)

pin_entry_3_digits_image.jpg ‡

 

 

 

 

 

... and so on, up to...

1920 x 1080 pixels .JPG (RGB mode only)

pin_entry_20_digits_image.jpg ‡

1920 x 1080 pixels .JPG (RGB mode only)

pin_entry_correct_image.jpg ‡

1920 x 1080 pixels .JPG (RGB mode only)

pin_entry_incorrect_image.jpg ‡

1920 x 1080 pixels .JPG (RGB mode only)
plus_n_indicator.jpg 1920 x 1080 pixels .JPG (RGB mode only)

Background of the thumbnail on which the text showing the number of participants is overlaid.

Note: the color of the text is specified in the themeconfig.json file.

presence_avatar_image.jpg

128 x 128 pixels .JPG (RGB mode only)

Shown next to the conference alias when using Infinity Connect clients, and as the contact avatar when using Lync / Skype for Business.

When the image is used, the corners will be cropped in order to be displayed as a round image.

streaming_indicator.png 100 x 100 pixels .PNG Used to indicate that the conference is being streamed or recorded.
timed_out.jpg 1920 x 1080 pixels .JPG (RGB mode only) Shown briefly prior to disconnecting participants (other than those using Infinity Connect) who have connected to a Virtual Reception but did not enter a valid conference number.
transfer.jpg † 1920 x 1080 pixels .JPG (RGB mode only) Shown briefly to participants (other than those using Infinity Connect) while being transferred from a Virtual Reception to a Virtual Meeting Room or Virtual Auditorium.

two_stage_dialing.jpg †

1920 x 1080 pixels .JPG (RGB mode only) Shown to participants (other than those using Infinity Connect) who have connected to a Virtual Reception.

two_stage_dialing_conf_number_invalid_image.jpg

1920 x 1080 pixels .JPG (RGB mode only) Shown to participants (other than those using Infinity Connect) who have connected to a Virtual Reception and have entered an invalid conference number.

waiting_for_conference_leader_image.jpg

1920 x 1080 pixels .JPG (RGB mode only) Shown to Guests while waiting for a Host to join.
watermark_icon.png * 200 x 100 pixels .PNG

Transparent image used for applying a watermark to the main speaker video in a conference.

The default image is a white Pexip logo with 40% transparency and is shown here against a blue background.

See Video watermarking for more information.

‡ When creating customized themes, these files can be automatically generated using a background image and foreground color of your choice.

† These images will be overlaid with system-generated text. By default this text is white, but the color can be changed via the themeconfig.json file. When creating customized themes, you must therefore ensure these images include sufficient empty space starting from 755 pixels from the top of the image, in a contrasting color to the text, to allow the text to be visible.

* Added in v13.

The default font for the overlaid system-generated text is Roboto, or if that is not available for the selected language, Noto Sans. Icons are from the Material Design icon library.

Colors, background and text

The wording and color of certain text and image backgrounds can be customized via the optional themeconfig.json file.

Item Description Value in Base theme
enable_dtmf_conference_control

Determines whether Host participants can use DTMF to control the conference (true) or not (false).

true
dtmf_conference_control_commands

If DTMF controls are enabled, this section specifies the DTMF digits used for each control. Current controls are:

  • conference lock and unlock (toggle_lock)
  • mute and unmute all guests (toggle_guest_mute)
  • terminate the conference (end_conference)

When changing the DTMF controls, you must only edit the digits inside the first pair of quotes on each line (i.e. *7, *5 and ##). Editing anything else will disable DTMF commands.

Each control must be two DTMF digits long, and all the commands must be different. See Changing DTMF controls for guidance on best practice.

"*7" : "toggle_lock"
"*5" : "toggle_guest_mute"
"##" : "end_conference"
no_main_video_bg The color of the background to the no_main_video_icon.png image. 0x000000
(black)
no_presentation_video_bg The color of the background to the no_presentation_video_icon.png image. 0x000000
(black)
disable_streaming_indicator Determines whether the streaming indicator is disabled (true) or enabled (false). false
disable_watermark_icon * Determines whether the watermark icon is overlaid onto the main speaker video (false) or is not used (true). See Video watermarking for more information. false
streaming_indicator_text The text that appears to the right of the streaming indicator when it slides out over the main video image. Streaming enabled

virtual_reception_text_color

The color of the text that is overlaid at the bottom of the transfer.jpg and two_stage_dialing.jpg images. 0xFFFFFF
(white)
plus_n_indicator_text_color The color of the text that is overlaid on the plus_n_indicator.jpg image, which shows how many additional participants are in the conference. 0xF38B3C
(orange)
indicator_num_color The color of the text that is overlaid on the indicator_num_bg
_color
background, which slides out to show how many additional audio participants are in the conference.
0xF38B3C
(orange)
indicator_num_bg_color † The color of the background to the indicator_num_color text, which slides out to show how many additional audio participants are in the conference. 0xBE222222
(75% opaque dark gray)

* Added in v13.

† This value can optionally include a level of transparency using ARGB notation, where the first two digits represent the level of opacity applied (see Configuring colors, background and text for more information).