Download Administrator guide as PDFEnabling NTP on the Management Node
All host servers must be synchronized with accurate time before you install the Pexip Infinity Management Node or Conferencing Nodes on them.
You must enable NTP on your Management Node before deploying any Conferencing Nodes.
Pexip Infinity uses NTP servers to obtain accurate system time. This is necessary to ensure correct operation, including configuration replication and log timestamps.
Pexip Infinity Management Node and Conferencing Nodes use the UTC timezone, and all logs are in UTC. Note however that the administrator web interface uses your local time. For more information, see Timezones.
We strongly recommend that you configure at least 3 distinct NTP servers or NTP server pools to ensure that log entries from all nodes are properly synchronized.
To add, edit or delete the set of available NTP servers, go to .
The available options are:
| Option | Description |
|---|---|
| Address | The IP address or FQDN of the NTP server. |
| Description | An optional description of the NTP server. |
| Secure NTP key ID | This optional field allows you to configure a key ID which is used in conjunction with the Secure NTP key for authenticating access to a secure NTP server. |
| Secure NTP key | This optional field, used in conjunction with the Secure NTP key ID, allows configuration of a SHA1 key for authenticating access to a secure NTP server. Enter the plaintext key; this will be stored as a SHA1 hash. |
After configuring the NTP servers available to your system, you should assign appropriate NTP servers to each location (). Each Conferencing Node in that location will then use those NTP servers.
You can also select the specific NTP servers to be used by the Management Node ().