You are here: Integration > Microsoft Lync / Skype for Business > Using Lync / Skype for Business clients with Pexip Infinity

Using Lync / Skype for Business clients with Pexip Infinity

This guide helps you to understand how you can use a Microsoft Lync and Skype for Business client within a Pexip Infinity deployment. It explains how to make a call from Lync / Skype for Business to a Pexip Infinity VMR, and how to make a call from Lync / Skype for Business to other non-Lync / Skype for Business users.

Making a video call to a Pexip Virtual Meeting Room (VMR)

You can make a video call from Lync / Skype for Business to any Pexip Virtual Meeting Room (VMR).

Adding a Pexip Virtual Meeting Room as a Lync / Skype for Business contact

Before you can make a video call to a Pexip VMR, you can add that VMR to your Lync / Skype for Business Contact List:

  1. Select (Add a Contact) and then select Add a Contact Not in My Organization > Other.
  2. In the IM Address field, enter the address (alias) of the Pexip VMR, for example meet.alice@example.com and select OK.

If the VMR name is correct, the contact's presence should show as Available. By default, the picture (avatar) used to represent the VMR contact will be the Pexip logo, as shown below. However, the VMR may have been set up to use a different image (potentially a different image for each VMR).

If the presence status is not Available, e.g. it displays as Presence unknown, you should check that you have entered the VMR address correctly.

Calling the VMR

When the VMR is in your Lync / Skype for Business Contact List you can make a video call to that VMR in exactly the same way as you would call any of your other Lync / Skype for Business contacts.

  • A VMR presence of Available means that you can make a video call to that VMR. It does not necessarily mean that other participants are currently in that VMR, so when the VMR answers, you may be the only participant.
  • Your administrator may have configured the VMR to automatically call other participants, whenever the first participant calls into that VMR. In which case you may initially be the only participant, but other participants may join shortly.
  • If the VMR is PIN-protected, you can use the Lync / Skype for Business dial pad or keyboard to enter the conference PIN.
  • Some conferences may not start until the conference Host has joined. In this case, you will see a holding screen. If you are the conference Host, you should enter the Host PIN.

Making an audio-only call

You can make an audio-only call to a Pexip VMR in exactly the same way as you would make any other audio-only call to one of your Lync / Skype for Business contacts.

You will be connected to the VMR and the participants in the VMR will only receive your audio. Depending upon how your administrator has configured your system, you will either receive video and audio from the VMR (assuming it has video participants), or just receive audio and an avatar image of the conference. In either case, you can escalate your call from audio-only to video in the normal way by starting your video, if required.

Calling out to other (non-Lync / Skype for Business) endpoints

You can make video calls to other non-Lync / Skype for Business endpoints such as SIP and H.323 devices, providing your administrator has configured the Pexip Distributed Gateway to allow such calls.

Adding the address of the endpoint as a Lync / Skype for Business contact

As with making a video call to a Pexip VMR, you can first add the video address of the other (non-Lync / Skype for Business) endpoints to your Contact List:

  1. Select (Add a Contact) and then select Add a Contact Not in My Organization > Other.
  2. In the IM Address field, enter the video address (alias) of the endpoint, for example bob@example.com and select OK.

If the address is valid, the contact's presence should show as Available. By default, the picture (avatar) used to represent the VMR contact is the Pexip logo, as shown below. However, the administrator may have configured the system to use a different image.

If the presence status is not Available, e.g. it displays as Presence unknown, you should first check that you have entered the endpoint address correctly, and then check that your administrator has enabled direct calling to that address.

Calling the endpoint

When the endpoint is in your Contact List you can make a video call to that endpoint in exactly the same way as you would call any of your other Lync / Skype for Business contacts.

A presence of Available means that the Pexip Distributed Gateway recognizes the endpoint address and knows how to contact the endpoint. It does not necessarily mean that the endpoint itself is registered/signed in and is available to be called.

Calling the endpoint from within an existing Lync / Skype for Business video call or conference

You can add an endpoint to a current (in progress) Lync / Skype for Business video call or video conference. You do this in the same way as you would add any of your other contacts into a current call, such as by dragging and dropping the endpoint from your Contact List into your call.

You can also add a Pexip VMR to an in-progress Lync / Skype for Business call or conference. This will merge the Pexip VMR conference with the Lync / Skype for Business conference.

Screen sharing

Screen sharing with Pexip VMRs and other endpoints works in the same way as screen sharing between Lync / Skype for Business users.

Sharing your screen with VMR participants or other endpoints

If you are in a video call with a VMR or in a video call or conference with other endpoints, you can share your desktop or a specific program in the same way as you normally would with other Lync / Skype for Business participants.

Viewing shared content from a VMR or other endpoint

If the external endpoint or a VMR participant starts content sharing, you will be invited to view the content in the standard manner. The content is shown in the main window and the active speaker from the VMR or the other endpoint participant is shown in a compact window.

When a participant in the VMR is sharing content, the Lync presentation tab will always indicate that "<VMR contact name> is presenting" regardless of which of the VMR participants is sharing their screen.

Instant messaging with VMR participants or with other endpoints

Lync / Skype for Business users can send and receive instant messaging (IM) when they are connected to a Pexip VMR, or when in a direct person-to-person call with another non-Lync / Skype for Business client providing that chat is supported by that client device (such as Pexip's own Infinity Connect web, mobile and desktop clients).

When connected to a VMR, all Lync / Skype for Business users will see the content of any Lync / Skype for Business instant messaging (IM) conversations as usual. All messages from VMR participants are seen as coming from the VMR participant (e.g. meet.alice) but each individual message from the VMR is prefixed with that VMR participant's own display name e.g. "bob: hello".

Calling out to a Lync / Skype for Business user from within a Pexip conference

Note that as well as calling out to Pexip VMRs and other endpoints from within a Lync / Skype for Business video call, Lync / Skype for Business users can also be called from a VMR or other endpoint.

When a VMR or other endpoint calls your Lync / Skype for Business address, an alert pops up on your screen in the same manner as when another Lync / Skype for Business user calls you.