You are here: Administration > Maintenance > Automatically reporting errors

Automatically reporting errors

In order to allow continual monitoring and improvement of the Pexip Infinity platform, we encourage customers to send us details of any incidents that occur in their products. When this feature is enabled, incident reports are sent automatically to a specified URL. By default this is the address of a secure web server owned and managed by Pexip, but you have the option to change the URL.

We collate and analyze this information in order to identify issues with the software that can be resolved in future product releases. The information we receive will not be used for any other purpose.

The feature is enabled and disabled on a Pexip Infinity platform-wide basis, but when enabled each Management Node and Conferencing Node will send their individual incident reports directly to the incident reporting server.

You must therefore ensure that your IP routing and firewall configuration allows outbound communications from each of these systems to the nominated URL. By default, reports are sent to https://acr.pexip.com over TLS to port 443.

Content of incident reports

The exact content of each incident report will vary depending on the nature of the problem, but all reports always include:

  • the date and time that the incident occurred
  • the FQDN of the system on which the incident occurred
  • the IP address of the system on which the incident occurred
  • information about the Pexip Infinity software version
  • details of the internal software processes running at the time the incident occurred.

The incident reporting server will also annotate each report with the IP address from which it was received (generally this will be the public IP address of the sender's network). This information is not contained in the original incident report.

The incident reports may also include:

  • system configuration information
  • stack traces.

The incident reports never include:

  • system logs.

Enabling and disabling automatic sending of incident reports

Automatic sending of incident reports is enabled or disabled in the first instance when Running the Pexip Infinity installation wizard.

To enable or disable the automatic submission of incident reports, or to change the URL to which they are sent:

  1. On the Pexip Infinity Administrator interface, go to Platform configuration > Global settings.
  2. Select or deselect the Enable incident reporting box as required.
  3. If appropriate, in the Incident reporting URL field enter the URL to which reports will be sent.
  4. Select Save.